JALC4W167A7000768
|Stock #IS100768
   Check if this Isuzu Npr is still available

Used 2010 Isuzu Npr |279,236 Miles|Rear Wheel Drive

White Exterior with Very Dark Pewter Interior | 5.19 4 Cyl. |Automatic Transmission
Share

Like this Isuzu Npr or know someone who might like it? Share it!

Email PRINT BROCHURE

Standard Equipments on 2010 Isuzu Npr in Burlington, NJ

  • 4 Cylinder Engine
  • ABS
  • Adjustable Steering Wheel
  • Cloth Seats
  • Cruise Control
  • Daytime Running Lights
  • Diesel Fuel
  • Front Disc/Rear Drum Brakes
  • Floor Mats
  • Intermittent Wipers
  • Power Door Locks
  • Power Steering
  • Power Windows
  • Rear Wheel Drive
  • Steel Wheels
  • Tires - Front All-Season
  • Tires - Rear All-Season
  • Turbocharged
  • 4HK1-TC, diesel engine 317 CID (5.19L), 175 HP at 2400 RPM: 387 ft-lb gross torque at 1850 RPM. 4 cylinder, 16 valve, four cycle, overhead cam, turbocharged, inter-cooled, water cooled EGR valve, direct injection, electronically controlled common rail fuel system, engine cruise control and idle up function. Oil level check switch and light. Engine
  • 4HK1-TC, diesel engine 317 CID (5.19L), 205 HP at 2400 RPM: 441 ft-lb gross torque at 1850 RPM. 4 cylinder, 16 valve, four cycle, overhead cam, turbocharged, inter-cooled, water cooled EGR valve, direct injection, electronically controlled common rail fuel system, engine cruise control and idle up function. Oil level check switch and light. Engine
  • Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
  • Alternator, 110 AMP with integral regulator
  • Battery, Dual 12-V maintenance free, 750 CCA each
  • Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
  • Clutch, single dry plate 12.8" diameter actuated by self-adjusting master/ slave cylinder. Ceramic facing material.
  • Exhaust Brake, Butterfly valve type
  • Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
  • Front Axle, Reverse Elliot "I"-beam rated at 6830 lbs. (3098 kg). Includes integral hydraulic power steering. Ratio 18.8-20.9:1
  • Front GAWR, 5360 lbs (2431 kg) capacity
  • Front Suspension, 8440 lbs. (3828 kg) capacity. Semi-elliptical tapered leaf springs. Includes shock absorbers and stabilizer bar.
  • Front Tires, 215/85R16E (10 ply) tubeless Radial, all season
  • Front Wheels, 16" x 6", 6-hole disc, painted white
  • Fuel Tank, 30-gallon (113.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
  • Fuel Tank, 33-gallon (124.9L) cylindrical fuel tank. Outside mounted on right hand frame rail. Fuel water separator with dash mounted warning light.
  • GVWR, 14500 lbs (6577 kg) capacity
  • Rear Axle Ratio, 4.30:1
  • Rear Axle Ratio, 4.777:1
  • Rear Axle, R066, full-floating single-speed, 14,550 lbs. (6600 kg) capacity with oil lubricated rear wheel bearings
  • Rear Axle, R066, full-floating single-speed, 14550 lbs. (6600 kg) capacity with oil lubricated rear wheel bearings
  • Rear GAWR, 9880 lbs (4481 kg) capacity
  • Rear Suspension, 9880 lbs. (4481 kg) capacity. Semi-elliptical main and auxiliary multi-leaf springs. Includes shock absorbers.
  • Rear Tires, 215/85R16E (10 ply) tubeless Radial, all season
  • Rear wheel drive
  • Rear Wheels, 16" x 6", 6-hole disc, painted white
  • Transmission, Automatic, Aisin A465 6-speed, Ratios: 3.742, 2.003, 1.343, 1.000, 0.773, 0.634, Rev 3.539
  • Transmission, Manual, MZZ, 6-speed synchronized, Ratios: 6.369, 3.767, 2.234, 1.442, 1.000, 0.782, Rev. 6.369
  • Truck Application
  • Wheelbase, 109" (276.9 cm), includes ladder type channel frame. Full C section straight frame 33.5 inches (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
  • Wheelbase, 132.5" (336.6 cm), includes ladder type channel frame. Full C section straight frame 33.5 inches (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
  • Wheelbase, 150" (381.0 cm), includes ladder type channel frame. Full C section straight frame 33.5 inches (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
  • Wheelbase, 176" (447.0 cm), includes ladder type channel frame. Full C section straight frame 33.5 inches (85.1 cm) wide. Yield strength 44,000 psi, section modulus 11.89 cu.in. and RBM 523,160 lb-ft/in per rail.
  • Wheelbase, 176" (447.0 cm), includes ladder type channel frame. Full C section straight frame 33.5 inches (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
  • Cab Mounts, All steel low cab forward, BBC 70.9 in. (180.1 cm) 45 deg. mechanical tilt with torsion assist
  • Daytime running lamps
  • Mirrors, Dual cab mounted exterior with integral convex mirror
  • Paint Scheme, Solid
  • Windows, Tinted glass
  • Windshield Wipers, Intermittent wet-arm
  • Cruise control
  • Floor mats
  • Power windows & door locks
  • Tilt and telescoping steering column
  • Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
  • 4 channel anti-lock brake system
  • Daytime running lamps
  • EBD (Electronic Brake Distribution)

Pictures of used 2010 Isuzu Npr in Burlington, NJ

This 2010 Isuzu Npr is available at:
 1001 US 130 S
Burlington, NJ  08016 | Get directions

Check availability

Payment estimator

Loan term in months
$00.00